SS Buildcare

Nitocote CM210 is an elastomeric cementitious coating, used for waterproofi ng water retaining structures and water excluding structures. Nitocote CM210 provides an elastomeric waterproof coating suitable for use in potable water tanks, reservoirs, canals and culverts.

For modifying and improving bonding of fl oor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modifi ed fl oor screeds; waterproof plasters for masonary and slurries. Advantages  Simple to use - Single component, gauged as required. High - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc. Improves -Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.  Reduces - Provides waterproof screeds, plasters and Permeability slurries. Increases - Improved tensile and fl exural properties strength allow thin applications.  Versatile - Compatible with all common hydraulic cements.  Cost eff ective - Nitobond SBR (Latex) is economical to use 

Renderoc HSXtra is suitable for hand and spray application for repairs where high load bearing is required. Typical applications would include, but not be limited to, the following:  Vertical and overhead repairs to restore ‘covercrete’.  General concrete and masonry repairs.  Voids greater than 10 mm deep.  Repairs to honeycombing.  Larger scale repairs where formwork cannot be erected. 

To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc

Nitoflor Hardtop / Nitoflor Hardtop Standard provide a highly abrasion resistant surface to concrete floors by the dry shakeon method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways.

For easy and stain free release of concrete moulds and formwork of all types. Particularly where wooden formwork is used and de-moulding or stripping times exceed 24 hours. 

Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems. Advantages Rapid action Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease. Description Reebaklens RR cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution.

Lokfix mix and place grouts are used for high strength corrosion resistant anchoring of bolts and bars from 12-51 mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required. Permanent installation of reinforcement starter bars, foundation bolts, base plates, balustrading, barriers and safety fences, railway tracks, tie-back anchors, reinforcement dowelling abutments, ground anchors for towers, cranes, dock sills etc. Advantages Rapid strength gain. Vibration resistant. Corrosion resistant. Non-expansive. Can be placed underwater.

To minimise permeability and increase the waterproofi ng properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external plastering, bathroom fl oors, water tanks, sumps, drains etc. Feature and Benefi ts: Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades. Corrosion resistant: Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range. High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control. Cohesive Mix : Improves workablity and cohesiveness of the concrete. Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Nitozinc Primer Std is the recommended anti-corrosive primer for exposed steel reinforcement and structural steel on site.The product actively resists corrosion and avoids the generation of incipient anodes in immediately adjacent locations. Advantages  Active ‘Zinc-rich’ system combats corrosion by electro chemical means. Formulated for use with Nitocote protective coatings and enamel paints Two component product - easy to mix and use.

Brushbond RFX is an high performance elastomeric cementitious coating used for waterproofi ng and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments. The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications. 

For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also for removal of hardened concrete from tools, machinery and equipment, or rust and mill scale from steelwork.

For improving and bonding concrete repair mortars, floor toppings and screeds, waterproof renders and cementitious slurries. Mortars and bonding slurries produced with Nitobond SBR may be used for horizontal, vertical and overhead repair

Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including; ■ Under plate grouting to substantial structural elements. ■ Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery. ■ Heavy industrial applications in steelworks, refineries, chemical plants and electroplating works. ■ Structural infill where very high strength is required. ■ Rail track applications, to support heavy cranes, or on transporter rails

For quick, clean and easy stripping of moulds and formwork. ■ For high quality, fair-faced and stain-free concrete. Advantages ■ Ensure easy release, reducing damage and improving efficiency of production. ■ Minimises surface blemishes and staining, promoting high quality fair-faced concrete even with white cement. ■ Reduces opportunity of damage to formwork, extending usable life. ■ Minimises cleaning of formwork before re-use. ■ Suitable for use with virtually all types of formwork. ■ Inhibits corrosion of steel formwork.