- Our Products
- Shuttering Oil
Pioneers in the industry, we offer fosroc reebol emulsion xtra shuttering oil and fosroc reebol emulsion extra 200 ltr from India.
Fosroc Reebol Emulsion Xtra Shuttering Oil
Product Price: Rs 120 / LitreGet Best Price
Minimum Order Quantity: 2 Litre
Reebol Emulsion Xtra
|Shelf Life||12 Month|
|Feature||Concentrated And Emulsified Chemical Mould Release Agent|
|Specific Gravity||Typically 0.960 At 250 Degree Celsius|
|Packaging Size||20 Liter|
Concentrated and emulsifi ed chemical mould release agent
For easy and stain free release of concrete moulds and formwork of all types. Particularly where wooden formwork is usedand de-moulding or stripping times exceed 24 hours.
- Non-staining : No cleaning of unsightly oil stains if plastering is not required.
- High quality : Produces really fair faced fi nish concrete.
- Versatile : Can be used on all types of moulds.
- Minimises cleaning : Makes cleaning of form faces between pours very easy.
- Concentrate form : Reduces storage and transport costs.
- Water based : Only requires water for dilution.
- Aids corrosion inhibition
Reebol Emulsion Xtra is supplied as a pale amber liquid whichturns emulsifi er when diluted with water to produce a chemicalrelease agent, combining the outstanding release properties ofsuch materials with the economy of a conventional oil. It reactswith the alkali in the concrete to form a thin water repellent skinon the surface of the mould which enables easy stripping fromthe hardened concrete.
Fosroc off ers a comprehensive range of high performance, high quality concrete repair and construction products. In addition, Fosroc off ers technical support service to specifi ers, end-users and contractors, as well as on-site technical assistance in locations all over the country.
Dilution rate - 1 part Reebol Emulsion Xtra: 6parts clear water (by volume) Formwork surfaces - May be used on wooden or metal surfaces. Particularly eff ective on resinous coated surfaces including Reebol Formcote coated wooden surfaces. Non-staining - Can be used safely with white cement. Specifi c Gravity - Typically 0.93 to 0.96 at 270C .
First dilute Reebol Emulsion Xtra concentrate in the proportion of 1:6 with water, using a clean container and stirring thoroughly until evenly mixed. If the solution is not used the same day, it should be stirred again before use and may require very good stirring after 5 days. New Moulds : No preparation is normally necessary Metal moulds showing signs of rust, must be wire brushed or treated with emery cloth and burnished clean before coating. New timber : Plywood will give superior results and much extended re-use if fi rst coated with Reebol Formcote. Used moulds : Must be thoroughly clean and free from old concrete, dirt, cement laitence, old mould oil and other contaminations. Use a strong detergent for removal of oil and grease; Reebaklens for cement and concrete deposits. Application : Apply the Reebol Emulsion Xtra 1:6 water dilution to the face of the formwork by spray, brush or cloth. Only one coat should be applied ( as thinly as possible except on very absorbent new timber where two coats may be necessary for the fi rst application only ) and allow to dry. If the formwork is not used for several days, a further coat may be applied. Only a very thin fi lm of Reebol Emulsion Xtra should be applied. Excess could lead to surface dusting of the concrete. The best results are obtained by applying with a fi ne mist sprayer. Where a cloth is used, it should fi rst be soaked in the release agent and then squeezed out well before applying. This ensures the thinnest possible fi lm. Reebol Emulsion Extra is not generally recommended where demoulding is required within 24 hours, although excellent results may be obtained with shorter times. Drying time : It is essential that the Reebol Emulsion Xtra is thoroughly dry before placing concrete. Otherwise, being an emulsion, its performance may be impaired. In condition of high humidity drying times will be much longer than in warm dry conditions.
Get Best QuoteRequest A Callback
Fosroc Reebol Emulsion Extra 200 Ltr
Product Price: Rs 135 / KgGet Best Price
Uses For easy and stain free release of concrete moulds and formwork of all types. Particularly where wooden formwork is used and de-moulding or stripping times exceed 24 hours. Advantages Non-staining : No cleaning of unsightly oil stains if plastering is not required. High quality : Produces really fair faced fi nish concrete. Versatile : Can be used on all types of moulds. Minimises cleaning : Makes cleaning of form faces between pours very easy. Concentrate form : Reduces storage and transport costs. Water based : Only requires water for dilution. Aids corrosion inhibition
|Grade Standard||Analytical Grade|
|Usage/Application||For easy and stain free release of concrete moulds and formwork of all types|
|Form Of Chemical||Liquid|
|Coverage||r 80 to 180 m2|
|Type||Aids corrosion inhibition|
|Country of Origin||Made in India|
Get Best QuoteRequest A Callback